![Telefunken TF-PS2102 Instruction Manual Download Page 5](http://html1.mh-extra.com/html/telefunken/tf-ps2102/tf-ps2102_instruction-manual_1081727005.webp)
Instruction Manual
4
USB/MicroSD operation
Playback
Turn on the device.
Insert a microSD (TF) card into the slot.
Or insert a USB drive into the USB
port. Press the
M
button repeatedly to
select the USB or MicroSD mode.
• When playing, you can press
to play/pause the playback.
• During the playback you can press
•
•
the
and
buttons to go to the previous
and next track. Press and hold these
buttons to adjust volume.
It may take up to 60 seconds to open
and verify a large microSD card / USB drive
with many files.
•
This unit is equipped with a microSD slot
and USB port that can read and play MP3
files stored on standard microSD cards and
USB drives up to 32 GB.
•
FAT and FAT32 file system is supported
by this unit.
Never remove microSD cards and USB
drives from the unit during playback, always
stop playback, then press the
M
button to
switch to another mode before removing the
storage to prevent damage to your files and
cards/drives themselves.
FM radio
Turn on the device.
• Once the search is finished, you can
•
• Press the
M
button repeatedly to
select the FM mode.
• Press and hold to automatically
scan available radio stations. The
procedure will take several
minutes. Press again to stop.
press the
and
buttons to go to a
previous or next radio station. Press and
hold these buttons to adjust volume.
Microphone
• You can insert a microphone for
karaoke or other purposes into this unit by
connecting it to the 6.35mm microphone
input jack.
• Press the BASS button
to enhance bass during playback.
General USB/MicroSD notes
Light
• Press the LIGHT button to switch the
mood lighting off and on.
TWS function
• If you have two units at your
disposal, you can pair them to each other
and enable the True Wireless (TWS)
stereo sound.
• Turn the both units on and
switch them into the Bluetooth mode.
Press and hold PLAY on any of the units.
A beep will sound, indicating that the unit
is ready for TWS pairing.
Keep holding PLAY for 5-10 seconds, you
will hear another beep sound when the
units are paired successfully.
TWS works only in Bluetooth mode
and does not work when the microphone is
inserted.