4
Instruction manual
5
~220V/50Hz
ON
OFF
BASS
A
F
N
M
T
L
R
L
R
AUDIO INPUT
AUDIO OUTPUT
Connections
• Connect the satellite speakers audio plug
to the corresponding subwoofer audio output
socket (Left and Right).
• Connect a 3.5mm stereo or RCA plug to
the audio input socket. The other end to
sound source.
• Connect the power plug to AC power
source, switch on the power and adjust the
volume to your satisfaction.
General operations
Power on/off
When the unit is connected to the current
supply mains, press the POWER button
once to switch the unit on. Press this button
again to restart the unit. Press and hold this
button to switch the unit off.
Audio input
You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speakers of this unit.
• To connect an external audio device,
please use a standard audio cable with 3.5-
mm-to-3.5 mm plugs to connect the input
terminal AUDIO IN (RCA L and R inputs)
on the unit.
Press MODE button on the unit or INPUT
button on the RC to switch to AUX mode.
• Turn on the external device. You cannot
control playback with the buttons of this unit
except adjusting the volume.
Volume control
Rotate the volume knob or press the VOL
+/VOL- buttons on the RC
to adjust the
volume level of the unit. Press the MUTE
button on the RC to mute/unmute the
sound.
Audio output
Use a standard RCA audio cable to
connect the L and R audio outputs (satellite
speaker outputs) to the corresponding audio
inputs of an external media device (CD, DVD,
VCR, VCD, etc.).
Modes
Press the MODE button on the unit or the
INPUT button on the RC to select an operation
mode: AUX - USB - SD - FM - BT.
Radio operation
• Press the MODE button repeatedly
to select the RADIO (FM) mode.
• For FM reception extend the FM antenna.
• Press and hold the SCAN button
to automatically scan for available broadcasting
channels, press this button again to stop
scanning.
• Shortly press the NEXT button to jump
to the next preset station. Press and hold the
button to manually increase (fine-
tune) the radio frequency.
• Shortly press the PREVIOUS button to
jump to the previous preset station. Press
and hold the TUNING- button to manually
decrease (fine-tune) the radio frequency.
LED lighting
Press and hold the
(NEXT) button on
the panel to switch the LED lighting of the
unit on and off.
WARNING:SHOCK HAZARD-DO NOT OPEN
Сделано в Китае
