Telefunken TF-LED40S13T2, Instruction Manual

Page: 5 / 34

Installation
5
5
Installation
Connection
Outdoor Antenna Connection
Use 75 Ω coaxial cable plug or 300-75 Ω
impedance converter to plug in antenna input
terminal on the rear of the unit casing.
Other connections
• Connect audio and video sources
(Including DVD, VCDR, CAMCORDER and
PC) to the AV input using the included AV
cable.
• Plug the power cable in the electric outlet,
making sure the current voltage is supported.
• When using the LED as a computer
screen, connect the PC to the VGA jack from
the monitor using the VGA cable (not included).
• This unit has PC audio in jack. Connect
this jack to PC main unit with related audio
cable in PC mode and adjust the volume to
what you want.
• If the video source has a HDMI output
jack, you can connect the signal to the TV by
the HDMI cable (not included). Use the HDMI-
1(MHL) input to connect your smartphone via
a special cable to see the digital content on the
TV screen. Support of all devices with the MHL
function is not guaranteed.
• S/PDIF coaxial output is intended for
transmitting multi-channel digital sound to
an external decoder (e.g. in 5.1-CH format).
Coaxial cable should be used for connection
(not included).
• Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.
• PCMCIA slot is used for CI modules that
are obtained from your digital TV provider.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector