Operation
10
Operation
10
When watching high dynamic range films or
programs at night, by selecting this mode you
can reduce the volume to a very low level while
keeping the quality and fine details of sound.
In this case, you won’t disturb your family and
keep the high quality sound.
Video setup
General
Video setup page
Component
Sharpness
Brightness
Contrast
Audio
Dolby
Video
Preference
• COMPONENT: Cvbs
• SHARPNESS, BRIGHTNESS,
CONTRAST: You can set sharpness,
brightness and contrast according to your
preference.
Preference setup
(available when
playback is fully stopped)
General
Preference page
TV Type
Audio
Subtitle
Disc menu
Parental
Password
Default
Audio
Dolby
Video
Preference
• TV TYPE
This device is compatible with all kinds of TV
systems. You can select between PAL, NTSC
or Auto.
Auto: the TV system is selected
automatically according to the disc system.
• SPEAKER SETUP: Downmix
LT/RT: The audio out is set to Left and Right
channels format even if the original sound is in
the 5.1CH format.
Stereo: The audio out format is stereo even
if the original sound is 5.1CH format.
• SPDIF SETUP: Spdif output
Spdif off: no digital signal out (optical or
coaxial output off), only analog audio output.
SPDIF/RAW: no decoding on the amplifier
digital signal input.
SPDIF/PCM: the amplifier must be supported
by PCM decoding or Dolby digital decoding
function.
• MICROPHONE
You can switch the microphone on or off,
adjust the microphone volume and echo.
• EQUALIZER
Several EQ modes are available. You can
select one according to your preference and
the disc content.
• REVERB MODE
You can select the appropriate reverberation
mode: off, Concert, Living room, Hall,
Bathroom, Cave, Arena, Church.
Dolby Digital setup
General
Dolby Digital Setup
Dual mono
Dynamic
Audio
Dolby
Video
Preference
• DUAL MONO
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average
signal.
• DYNAMIC
