Operation
8
8
Operation
General operation
Press the POWER button to turn the unit
on. Press and hold the button again to turn
the unit off.
Turning the unit on/off
Press the MOD button repeatedly to
select between Radio, AUX or USB/SD
modes. Operation modes are indicated on
the display. The USB/SD mode is not
available unless a USB or SD storage
device is connected.
Mode selection
Adjust the volume by rotating the
VOLUME knob.
Volume control
Press the SELECT/VOLUME knob
repeatedly to select a parameter: BAS
(bass) => TRE (treble) => BAL (balance) =>
FAD (fader) => EQ (equalizer) => LOUD
ON/OFF => STEREO/MONO =>
LOC(local)/DX(distance) => VOL(volume).
Rotate the knob to adjust each mode.
• Bass/Treble: from -7 to +7;
• Balance: L7 (left) to R7 (right);
• Fader: from R7 (rear) to F7 (front).
• EQ: select POP/CLASS/ROCK/
JAZZ or OFF.
When equalizer is in any mode except OFF,
bass and treble are not adjustable.
Press and hold the SELECT button to
choose the equalizer.
Sound settings
AUX-in jack is intended for connecting an
external audio equipment to amplify the
sound. If connection is made correctly, the
audio signal from the external source will be
transmitted through the acoustics of the
head unit. This enables to adjust the volume
and quality of the sounding. For example,
you can connect an MP3-player to listen to
tracks using the car acoustic system.
AUX input
Press the CLK button to show the current
time on the display.
In this mode press and hold the CLK button
again. The time will start to flash.
Rotate the VOLUME knob to select the
current hour and minutes and press the
SELECT button to confirm.
Time display
Activating this feature will enhance bass
and treble frequencies when listening to
music at low volumes.
Loudness