Telefunken TF-1572, Instruction Manual, Page: 3 / 14

Instruction manual
3
Important safeguards
•
The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit
• Do not
e
xpose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• Do not disassemble the unit yourselves
Refer servicing to qualified service personnel
All the illustrations in this manual are
schematic images, which may differ from
actual objects.
Power supply
Battery operation
• Insert 2 АА (UM- 3 ) batteries (not included)
to the terminals inside the battery compartment
according to the polarity marks (+ and -). Your
set will not work normally from the battery
supply, but there is now the advantage that, in
case of a mains current failure or power
outage, your clock will continue to work. The
clock display will not light up, the clock time
and alarm setting will be held in the clock
memory by the battery back-up system.
This enables you to move the set from place
to place without re-setting the clock every
time. The battery back-up system is only
meant to be used for short-term power
failures. For longer durations the batteries may
become exhausted or there may be some
deviation in accuracy.
• When the batteries are exhausted, they
should be removed from the set to prevent
leakage. If you do not wish to take advantage
of the battery back-up system, your set will
work normally without batteries. However, if
disconnected from the mains, the clock figures
will flash when the mains are reconnected and
you must re-set the clock.
AС operation
• The appliance is for household use only.
• Before the first connecting of the appliance
check that the voltage indicated on the rating
label corresponds to the mains voltage in your
location.
• Insert the plug into the electrical outlet.
• The set is now working as an electronic
clock.
will start to flash.
Setting the clock (radio is OFF)
• Press and hold the TIME button. The time
to increase the HOUR. You can press and hold the
button to increase the number quickly.
• Press the V- button
to increase the MINUTES. You can press and hold
the button to increase the number quickly.
•
Press the V+ button
TIME button again to confirm.
•
Once time is set correctly, press the
Setting the alarm (radio is OFF)
• Press and hold either AL1 or AL2 buttons.
The alarm LED will start to flash.
between the BB and radio alarm signals.
Press AL1/AL2 to confirm.
• Press the V- / V+ buttons to select
to adjust the alarm time. You can press and hold
the button to increase the number quickly.
• Press the V- / V+ buttons
• Once the alarm is set press the AL1 or
AL2 button respectively to confirm the setting.
unit on. Press and hold this button to turn the unit
off.
General operations
Turning
Turning the unit on and off
•
Press and hold the /M ODE button to turn the
time display by double pressing the TIME button.
• You can switch between 12 and 24 hour
signal, you can press the TIME/SCAN
button to select a different radio station.
Press AL1/AL2 to confirm.
• If you select FM radio as the alarm