Telefunken MWRC20G, Manual

Page: 34 / 42

34 / 42 EN
5 OPERATION OF CONTROL PANEL
5. Instant Cooking
On the standby status, press Démarrer
(Start)
button, the oven will start cooking with
high power; system default cooking time is 1
minute. You can increase or decrease cooking
time by turning the knob.
Note: This instant cooking function applies to one
of following situations:
•
Activate instant cooking function within 2
minutes when the oven door is closed.
•
Activate instant cooking function within 2
minutes when the Pause/Annulation (Pause/
Cancel) is pressed.
•
Activate instant cooking function within 2
minutes when the preset cooking program
finishes.
6. Clock Setting
Clock button make it available for you to input
current or preset time when “:” flashes onto LED
display after plugged in, or try to skip it over to
continue if unnecessary.
Example: to set 12:30
Steps Display
1 After power-up, the colon
flashes
:
2 Press Horloge (Pre-set/
Clock) button once
00:00
3 Turn Cuisson A utomatique /
Temps.Poids (Auto Cooking/
Time. Weight) knob to set
exact hours.
12:00
4 Press Horloge (Pre-set/
Clock) button once again.
12:00
5 Turn Cuisson Automatique /
Temps.Poids (Auto Cooking/
Time. Weight) knob to set
exact minutes.
12:30
6 Press Horloge (Pre-set/
Clock) button once again or
wait for 5 seconds, and the
numbers will go steadily.
7. Microwave Cooking
This function is for cooking and heating food.
Press
Puissance (Power)
button, LED will
cycle to show 100P—80P—60P — 40P— 20P.
High power 100% microwave power.
Applicable for quick and
thorough cooking
Medium High power 80% microwave power.
Applicable for medium express
cooking
Medium power 60% microwave power.
Applicable for steaming food
Medium Low power 40% microwave power.
Applicable for defrosting food
Low power 20% microwave power.
Applicable for keeping warm
A
CAUTION: The max time which can
be set is 60 minutes
Never operate the oven empty.
At the maximum microwave power,
the oven will automatically lower
the power after a certain time of
cooking to lengthen the service life.
If you turn the food during
operation, press the Démarrer
(Start) button once and the preset
cooking procedure will continue.
If you intend to remove the food
before the preset time, you must
press Pause/Annulation (Pause/
Cancel) button once to clear
the preset procedure to avoid
unintended operation of next time
use.