With the remote control
When the frame is in slide-show mode and photos are being displayed, press the remote
control’s EXIT button once, and then press SETUP.
The menu is displayed.
Use the UP
and DOWN buttons, until the “Multiple display” line (fig. 8) is highlighted.
Press the ENTER button to display the options, then select the desired image size using
the UP and DOWN buttons.
Press ENTER to confirm your choice, and then press EXIT to
leave the menu.
Press ENTER to launch the slide-show again:
your images will be
displayed in the desired dimension.
With the frame
When the frame is in slide-show mode and photos are being displayed, press the
button to leave the slide show, then press second time for 3 seconds..
Highlight the
"Image dimension" (fig. 8) line, using the
buttons. Press
to display the options.
Select the desired size with the
buttons, then press
to confirm your choice.
Press
the
button, then
to launch the slide-show again.
4. Transition between the images
You are able to choose the transition type
between each of the images of your slide-
show.
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
19
Fig.8
Summary of Contents for Digicadre 7001
Page 1: ...User guide Model 7001 ...
Page 49: ......
