background image

English

   - 57 -

Broadband ISP 

connection

Wireless LAN 

adaptor

USB inputs on the 

rear left side of the TV

A Wireless-N router (IEEE 802.11a/b/g/n) with 

simultaneous 2.4 and 5 GHz bands is designed to 

increase bandwidth. These are optimized for smoother 

and  faster  HD  video  streaming,  file  transfers  and 

wireless gaming.

• 

Use a LAN connection for quicker file sharing 

between other devices like computers.

• 

The frequency and channel differ depending on the area.

• 

The transmission speed differs depending on the 

distance and number of obstructions between the 

transmission  products,  the  configuration  of  these 

products, the radio wave conditions, the line traffic 

and the products that you use. The transmission may 

also be cut off or may get disconnected depending 

on the radio wave conditions, DECT phones or any 

other WiFi 11b appliances. The standard values of 

the transmission speed are the theoretical maximum 

values for the wireless standards. They are not the 

actual speeds of data transmission.

• 

The location where the transmission is most effective 

differs depending on the usage environment.

• 

The Wireless LAN adaptor should be connected 

directly to the TV’s USB port. USB hubs are not 

supported. You  can  plug  your  wifi  dongle  into  a 

extension dock in cases where network quality is 

poor and the wifi dongle needs to be placed to a 

location with better signal quality.

• 

The Wireless LAN adaptor supports 802.11 a,b,g & 

n type modems. It is highly recommended that you 

should use the IEEE 802.11n communication protocol 

in order to avoid any possible problems while watching 

videos.

• 

Use the other USB input, if you experience problems 

with audio/video performance.

• 

You must change your modem’s SSID when there are 

any other modems around with the same SSID. You 

can encounter connection problems otherwise. Use 

a wired connection if you experience problems with a 

wireless connection. 

Configuring Wireless Device Settings

To enable Wi-Fi features, plug in the Wi-Fi dongle to one 

of the USB ports. Open the 

Network/Internet Settings

 

menu and select 

Network Type

 as 

Wireless Device

 to 

start connection process.
The TV will scan the wireless networks automatically. 

A list of available networks will be displayed. Please 

select your desired network from the list. 

Note:

  If  the  modem  supports  N  mode,  you  should  set  N 

mode settings.

If the selected network is protected with a password, 

please enter the correct key by using the virtual 

keyboard. You can use this keyboard via the directional 
buttons and the 

OK

 button on the remote control. 

Wait until the IP address is shown on the screen.
This means that the connection is now established. 

To disconnect from a wireless network, highlight 

Network Type 

and press Left or Right buttons to set 

as 

Disabled

.

Highlight 

Internet Speed Test

 and press the 

OK

 button 

to check your internet connection speed. Highlight 

Advanced

 

Settings 

and press the 

OK

 button to open 

the advanced setting menu. Use directional and numeric 

buttons to set. Press the 

OK

 button to save settings 

when complete. 

Other Information

The status of the connection will be displayed as 

Connected

 or 

Not

 

Connected

 and

 

the current IP 

address, if a connection is established.

Connecting to your mobile device via WiFi

• 

If your mobile device has WiFi feature, you can connect 

it to your TV via a router, in order to access the content 

in your device. For this, your mobile device must have 

an appropriate sharing software.

• 

Connect to your router following the steps stated above 

in the 

Wireless Connectivity

 section.

• 

Afterwards, engage your mobile device with the router 

and then activate the sharing software on your mobile 

device. Then, select files that you want to share with 

your TV.

• 

If the connection is established correctly, you will be 

able to access the shared files from your mobile device 

via the 

Media Browser

 of your TV.

• 

Enter the 

Media Browser

 menu and the playback 

device selection OSD will be displayed. Select your 

mobile device and press the 

OK 

button to continue.

• 

If available, you can download a virtual remote 

controller application from the server of your mobile 

device application provider. 

Note: 

This feature may not be supported on all mobile 

devices.

Summary of Contents for D43F278A3C






























Reviews: