2 TELEFUNKEN Elektroakustik
3
Alchemy Series
What’s In The Box
For a complete list of additional accessories and replacement parts for Alchemy Microphone Series
products, please visit www.t-funk.com.
Quick Start Guide - TF29, TF39, TF47, & TF51
1. Attach either included mount onto a microphone stand.
2. Thread the microphone into the mount until hand tight.
3. Plug the included 7-pin microphone cable into the microphone then into the power supply.
4. Make sure the power supply is set to the correct mains voltage (115V or 230V). Plug the included power
cable into the power supply, then into mains power.
5. Connect a standard 3-pin microphone cable to the power supply and then to your microphone
preamplifier input.
6. Turn on the power supply. Let the system warm up for 10 minutes before use.
Safety Warning:
Vacuum tube microphones, their associated power supplies, and their cables carry
potentially harmful voltages. Make sure all connections are made before powering on your microphone
system. Do not open your microphone or power supply while it’s connected to mains power and powered on.
If your microphone stops working, turn it off and visit www.t-funk.com/repairs for information on repairing
your product.
System
TF11
TF29
TF39
TF47
TF51
M 903 Multi Pattern Power Supply
X
X
X
M 902 Fixed Pattern Power Supply
X
M 803 Tube Microphone Cable
X
X
X
X
M 782 Stand Mount
X
X
X
X
X
M 703 Shock Mount
X
X
X
X
X
MC11 Microphone Case
X
MS01 Microphone Sleeve
X
X
X
X
X
ZC03 Light Weight Carrying Case
X
X
X
X
Quick Start Guide - TF11 FET
1. Attach either included mount onto a microphone stand.
2. Thread the microphone into the mount until hand tight.
3. Plug a standard 3-pin microphone cable (not included) into the microphone then into your microphone
preamplifier input.
4. Apply +48V phantom power from your microphone preamplifier. Allow the microphone 15 seconds to power
up before use.
