Teleflex TFX320, Operation Manual

Page: 21 / 31

19
USING THE 320 SERIES
CONTROL PANELS
S
IMULATOR
allows the 320 to operate in
simulated sonar mode. This is useful for
learning the features and functionality of the
320 when not on the water. When operating
with the simulator on and without a transducer connected the 320 does not
remember any changes to settings.
The Simulator setting is not retained in memory when the 320 is turned off.
Note: The Units Control Panel selects the units of measure.
Depending on the
320 model you have one of the following options:
Units selects the units of measure for boat speed
on the 320 . Selecting KTS displays the speed in
nautical miles per hours; MPH displays the speed
in miles per hour.
On international versions of the 320 , Units selects the units of measure for boat
speed and depth in one of four combinations:
• Feet/MPH displays depth in feet and speed in miles per hour.
• Feet/KTS displays depth in feet and speed in nautical miles per hour.
• Meters/KPH displays depth in meters and speed in kilometers per hour.
• Meters/KTS displays depth in meters and speed in nautical miles per hour.
The Units setting is retained in memory when the 320 is turned off.
L
ANGUAGE
selects the language for text used in
the Control Panels and for messages. Note: The
Language Control Panel is only available on
international versions of the
320 .
Language setting is retained in memory when the 320 is turned off.