MX User Guide
PAGE 30
Method 2:
For manually assigning the IP address, unselect the "Obtain
an IP address automatically". And input the specified IP address, port,
network mask address and default gateway address.
Step 5
. If user wants to enable the dynamic IP connection, select the
"sureLINK enable" to enable sureLINK and input the registered sureLINK
address and the refresh rate. For example, if the registered sureLINK address
is
“www.rx.teleeye.teleeye.net” and the refresh rate is 15 minutes, please
input them to the corresponding textbox as follows:
[Note] If user dose not know any sureLINK address, please go to
http://www.teleeye.com/softreg/customer/s_domainreg.jsp
for sureLINK registration.
Step 6:
Click the
[Apply]
button to apply all the settings. Then, the password
dialogue box will be shown. Input the correct camera password and then click
the
[OK]
button.
[Note] Default camera password is "000000".
