TeleEye MX600, Installation Manual, Page: 20 / 34

MX600 User Guide
5. Network Configuration
In this chapter, it will guide you how to setup the target camera IP address.
5.1 Connecting the Camera to Network
Before setting the IP address, please make sure the network connection is correct as
following diagram:
5.2 Changing the IP Address
Step 1.
Turn on the network camera and make sure the camera is connected to the
network. Then select the “Run TeleEye IP Setup Utility” from the start menu.
Step 2.
Search the target camera by its serial number, and hightlight the
corresponding row from the list on the left side of the window to select it. If
the camera cannot be found, click the [Refresh] button.
PAGE 20