TeleEye DM338, User Manual

Page: 4 / 28

Precautions
1 Transportation
TeleEye DM338 Vandal Proof P/T Dome Camera is sophisticated product and should be
protected against extremes of pressure, temperature, vibration and humidity during
storage and transportation.
2 Do not disassemble the dome module
There is no user serviceable part or setting inside. Failure to observe this instruction could
result in damage to TeleEye DM338 and loss of warranty. Only suitably qualified and
authorized personnel may undertake repairs.
3 Installation
TeleEye DM338 is designed for ceiling mount only. Do not install it in any other
orientations. Failure to comply with this requirement will result in damage to the product.
4 Cleaning
In order to get clear image, down cover should be cleaned periodically. Be careful when
cleaning, only hold down cover edge, avoid direct touching down cover, acid matter in the
fingers will corrupt down cover plating surface. Hard material scratching down cover will
lead to vague image. Please use soft clean cloth or other substitution to clean interior and
exterior surface. Neutral detergent as well as any high-grade furniture detergent can be
used to clean down cover
5 Environment
The operation temperature of TeleEye DM338 is -10 ~50 , input power supply is DC
12V/600mA. Do not use it in circumstances where temperature, humidity or power supply
variations fall outside the range of specified values.
6 Excessive light
It is important that TeleEye DM338 is not left in a position where it is pointing directly at the
sun or other extremely bright light source. This may result in CCD damage and poor image
quality.
7 Do not install Tele Eye DM338 in the outdoor environment
℃ ℃
3