Video Server
Software User Guide
PAGE 5
Start Server
You can go to the web site
http://www.TeleEye.com
to do software registration
with the Software Serial Number and Authorization Code provided in this page.
After successful registration, you will obtain a Registration Code. Enter this
code and press the [
OK
] button, your software will be registered. Afterwards,
the Server Status Page will be shown.
Note:
If you have already installed and registered one copy of the
Video
Server
software, and you want to migrate the software to another computer,
you need to do the un-registratio. Having un-install the software, you will
obtain an un-registration code. Use this code together with the Software Serial
Number and the New Authorization Code to do the registration again for the
software installed on the new computer.
During the first time you start up your
Video Server
, the server will show you
the default configurations. Otherwise, it will show you the previous
configurations. Enter the Administration password to gain access to the server
and go to the Configuration page. The default Administration password is
“000000”.
