Teledyne T100, Instruction Manual, Page: 24 / 404

Introduction, Features and Options
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
24

Multi-tasking software to allow viewing test variables while operating

Continuous self checking with alarms

Bi-directional USB, RS-232, and 10/100Base-T Ethernet ports for remote operation
(optional RS-485)

Front panel USB ports for peripheral devices

Digital status outputs to indicate instrument operating condition

Adaptive signal filtering to optimize response time

Temperature and Pressure compensation

Internal Zero and Span check (optional)

Internal data logging with 1 min to 365 day multiple averages

Critical flow orifices to provide flow stability
1.3. OPTIONS
The options available for your analyzer are presented Table 1-1 with name, option
number, a description and/or comments, and if applicable, cross-references to technical
details in this manual, such as setup and calibration. To order these options or to learn
more about them, please contact the Sales department of Teledyne ML at:
TOLL-FREE: 800-846-6062
TEL: +1 303-792-3300
FAX: +1 303-799-4853
E-MAIL: tml_support@teledyne.com
WEB SITE: http://www.teledyne-ml.com
Table 1-1: Analyzer Options
OPTION
OPTION
NUMBER
DESCRIPTION/NOTES REFERENCE
Pumps
Pumps meet all typical AC power supply standards while exhibiting same pneumatic
performance.
10A External Pump 100V - 120V @ 60 Hz N/A
10B External Pump 220V - 240V @ 50 Hz N/A
10C External Pump 220V - 240V @ 60 Hz N/A
10D External Pump 100V
– 12V @ 50 Hz
N/A
10E External Pump 100V @ 60 Hz N/A
11B Pumpless, internal or external Pump Pack N/A
13 High Voltage Internal Pump 240V @ 50Hz N/A
Rack Mount Kits
Options for mounting the analyzer in standard 19” racks
20A Rack mount brackets with 26 in. chassis slides N/A
20B Rack mount brackets with 24 in. chassis slides N/A
21 Rack mount brackets only (compatible with carrying strap, Option 29) N/A
23 Rack mount for external pump pack (no slides) N/A