SyriXus Series Pumps Installation and Operation Guide
Section 1 Introduction
1-8
EAR99 Technology Subject to Restrictions Contained on the Cover Page
Figure 1-3
1000x flow rate range
1.3 Unpacking
After removing the pump, controller, and accessories from the
shipping carton, examine them for signs of shipping damage. Be sure
no internal parts have shaken loose in transit. If there is any shipping
damage, file a claim with the delivering carrier immediately.
Compare the contents of the boxes with the enclosed packing slip. If
there are shortages, contact Teledyne ISCO immediately using the
information in 9.3 "Customer Service Department".
1.4 Controls and
Indicators
The pump controller regulates all pumping functions. It is designed to
sit on top of the pump base, but may be located elsewhere, according to
safety and convenience. Programming and setup are performed using
the keypad on the front panel. The controller front panel is shown in
Figure 1-4 and described in Table 1-6 "Pump Controller Front Panel
Label". Table 1-7 "Pump Controller Key Functions" explains the key
functions.
The rear panel of the pump controller contains several input and
output connectors, explained in Table 1-8 "Pump Controller Rear
Panel Connectors", and shown in Figure 1-5.
The only operational control on the pump itself is the power switch,
shown in Figure 1-7. The rear panel has several connectors, described
in Table 1-9 "Pump Rear Panel Connectors", and shown in Figure 1-6.
Flow Rate (mL/min)
Max. Pressure (bar)
0.001 to 340
137.9
340 to 408
(409.8 mL/min – flow rate)
1.9756
1000x Flow Rate Range
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
425
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
Pressure (bar)
Flow Rate (ml/min)
408
340
137.9
