Teledyne Sierra M6-2, User Manual, Page: 256 / 538

Teledyne LeCroy Analysis
254 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual

Function

Status

Direction: All, I ‐ >T, T ‐ >I, or Custom

Duration: All, Custom, or time unit

Count: All, Custom, or a number

%: of total count
Figure 3.51: SAS: TASK Command Report
SAS Address Report (SAS)
To display the SAS Address Report (see Figure 3.52 on page 254 ), click the SAS Address
tab.The SAS Address Report displays the report data in columns with the following
information:

Source SAS Address: All, Custom, or an address

Destination SAS Address: All, Custom, or an address

Protocol Type: SMP, SSP, STP

Frame Type: All, Custom, Command, Data, DMA Activate,
Register Host To Device, Register Device To Host, Response, XFER_RDY

Count : All, Custom, or a number
Figure 3.52: SAS: SAS Address Report
Lanes Report (SAS)
To display the Lanes Report, click the Lanes tab. The Lanes Report displays the report data
in columns with the following information (see Figure 3.53 on page 255 ):

Port

Open Accept: All, Custom, or a number

Open Reject: All, Custom, or a number

AIP Waiting on Con.

Break

SCSI Command: All, Custom, or a number

ATA Command: All, Custom, or a number

SMP Command: All, Custom, or a number

Out Standing Command: All, Custom, or a number

Transfer Bytes: All, Custom, or a number

Link Utilization (time)

Link Utilization %