Teledyne ProEM Series, System Manual

Page: 138 / 162

138 ProEM System Manual Issue 3
NOTE:
The arrays listed and the specifications provided are those
that were available at the time that the manual was written.
For current arrays and specifications, refer to ProEM data
sheets which can be downloaded from the Teledyne
Princeton Instruments website
(
www.princetoninstruments.com
).
A.3 Mounts
• C-mount: Standard threaded video mount.
• Spectroscopy-mount: 3.60" and 3.88" bolt circles
• C- to Spectroscopy-mount adapter: Optional
• Adjustable C- to Spectroscopy-mount adapter: Optional
A.4 Focal Distance (Optical)
• C-mount, Front Surface to Focal Plane: 0.690" (17.53 mm)
• Spectroscopy-mount, Front Surface to Focal Plane: 0.590" (14.99 mm)
A.5 Camera
• Cooling: Thermoelectric; air or circulating coolant
• Coolant Ports:
The inlet/outlet ports on the side of the camera allow you to connect the
camera to an external coolant circulator. Two 10 mm (3/8") ID, 3 meter (10 ft)
coolant hoses with the appropriate fittings for the ProEM are supplied with each
system.
Additional ProEM-compatible female barbs (part number VL2-F10B-P) are
available from Koolance (www.koolance.com). Refer to your circulator's
documentation for information about circulator-compatible fittings.
• CCD Operating Temperature:
EM
Digitization
(Readout) Rate 10 MHz, 5 MHz 10 MHz, 5 MHz 10 MHz, 5 MHz 6.67 MHz,
4 MHz, 1 MHz
6.67 MHz,
4 MHz, 1 MHz
Low Noise
Digitization
(Readout) Rate 5 MHz, 1 MHz,
100 kHz
5 MHz, 1 MHz,
100 kHz
5 MHz, 1 MHz,
100 kHz
5 MHz, 1 MHz,
100 kHz
5 MHz, 1 MHz,
100 kHz
Table A-1: CCD Specifications by ProEM Model (Sheet 2 of 2)
Parameter ProEM:512B ProEM:512BK ProEM:1024B
ProEM:1600
(2)
ProEM:1600
(4)
Table A-2: Default Operating Temperature
CCD Size Default
512 x 512 -70°C
1024 x 1024 -55°C
1600 x 200 -55°C
1600 x 400 -55°C