Teledyne ProEM Series, System Manual

Page: 137 / 162

137
Appendix A: Technical Specifications
NOTE:
This appendix provides some of the basic specifications of a
ProEM system. If the information you are looking for is not
here, it may be available in
Appendix B, Outline Drawings ,
on page 141, or on the appropriate data sheet. Data sheets
can be downloaded from the Teledyne Princeton
Instruments website (
www.princetoninstruments.com
).
A.1 Window
UV grade fused-silica (0.125"/ 3.18 mm thick). Teledyne Princeton Instruments offers a
choice of multi-layer VIS-AR, UV-AR, and NIR-AR coating options on the vacuum
window. For enhanced sensitivity in the UV region, proprietary Unichrome™ coating of
the CCD is available. For broadband applications, a choice of MgFl
2
or broadband AR
coating is available upon request.
A.2 CCD Arrays
Table A-1: CCD Specifications by ProEM Model (Sheet 1 of 2)
Parameter ProEM:512B ProEM:512BK ProEM:1024B
ProEM:1600
(2)
ProEM:1600
(4)
CCD e2v CCD97B PI Proprietary e2v CCD201B PI Proprietary PI Proprietary
Image Type Monochrome Monochrome Monochrome Monochrome Monochrome
Resolution 512 x 512 512 x 512 1024 x 1024 1600 X 200 1600 X 400
Pixel Size
16

m x 16

m 16

m x 16

m 13

m x 13

m 16

m x 16

m 16

m x 16

m
Active Area 8.2 mm x
8.2 mm
8.2 mm x
8.2 mm with
on-chip mask
13.3 mm x
13.3 mm
25.6 mm x
3.2 mm
25.6 mm x
6.4 mm
Peak Q.E. 95% 92% 95% 92% 92%
Frame Rate > 33 fps
(full frame)
> 33 fps
(full frame)
> 8.5 fps
(full frame)
Spectral Rate
(at 6.67 MHz) > 1500 fps (full
vertical binning)
> 1000 fps (full
vertical binning)
Readout
Amplifiers
(Ports) 2 2 2 2 2