Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 97 / 357

Chapter 5 Configuration APIs 97
5.1.1.30 PicamSensorType
Data Type
PicamSensorType
is defined as
enum
.
Description
PicamSensorType
is the set of sensor types.
Enumerator Definitions
Refer to Table 5-30 for enumerator definitions.
5.1.1.31 PicamShutterStatus
Data Type
PicamShutterStatus
is defined as
enum
.
Description
PicamShutterStatus
is the set of shutter statuses.
Enumerator Definitions
Refer to Table 5-31 for enumerator definitions.
PicamSensorTemperatureStatus_
Unlocked
The temperature has not stabilized at the set
point.
Table 5-29:
PicamSensorTemperatureStatus
Enumerator Definitions (Sheet 2 of 2)
Enumerator Description
Table 5-30:
PicamSensorType
Enumerator Definitions
Enumerator Description
PicamSensorType_Ccd
The sensor is a CCD.
PicamSensorType_Cmos The sensor is a CMOS.
PicamSensorType_InGaAs
The sensor is an InGaAs.
Table 5-31:
PicamShutterStatus
Enumerator Definitions
Enumerator Description
PicamShutterStatus_Connected A shutter is connected.
PicamShutterStatus_NotConnected
No shutter is connected.
PicamShutterStatus_Overheated A connected shutter has overheated and is
temporarily disabled.
NOTE:
If a shutter becomes overheated,
data acquisition will stop and cannot
be started again until the shutter is no
longer overheated.