Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 64 / 357

64 PICam™ 5.x Programmer’s Manual Issue 11
4.3.4 Demo Camera Identification APIs
This section provides programming information for Demo Camera Identification APIs.
4.3.4.1
Picam_DestroyModels()
Picam_DestroyModels()
releases memory that has been allocated for use by the
model_array
.
NOTE:
model_array
may be a single
PicamModel
allocated by
PICam.
If
model_array
is a null array, calling
Picam_DestroyModels()
has no effect.
Syntax
The syntax for
Picam_DestroyModels()
is:
PICAM_API Picam_DestroyModels(
const PicamModel* model_array);
Input Parameters
Input parameters for
Picam_DestroyModels()
are:
Output Parameters
There are no output parameters associated with
Picam_DestroyModels()
.
Related APIs
For additional information, refer to the following related APIs:
• Picam_GetAvailableDemoCameraModels()
model_array:
Pointer to the memory location where the array is stored.