Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 194 / 357

194 PICam™ 5.x Programmer’s Manual Issue 11
7.1 Data Type Definitions
This section provides programming information about the following PICam advanced
data definitions:
• Shared Camera/Accessory Plug and Play Discovery Data Enumerations
— PicamDiscoveryAction
• Shared Camera/Accessory Access Enumerations
— PicamHandleType
• Shared Camera/Accessory Parameter Information Enumerations
— PicamDynamicsMask
• Camera-Specific Data Acquisition Enumerations
—
PicamAcquisitionState
—
PicamAcquisitionStateErrorsMask
7.1.1 Shared Camera/Accessory Plug and Play Discovery Data Enumerations
This section provides programming information about shared camera/accessory plug
and play discovery data enumerations.
7.1.1.1 PicamDiscoveryAction
Data Type
PicamDiscoveryAction
is defined as
enum
.
Description
PicamDiscoveryAction
is the set of discovery states available for hardware.
Enumerator Definitions
Refer to Table 7-1 for enumerator definitions.
Table 7-1:
PicamDiscoveryAction
Enumerator Definitions
Enumerator Description
PicamDiscoveryAction_Faulted
A hardware item has critically malfunctioned
and is in need of service. Any acquisition in
progress with this hardware will be stopped
and further acquisition are not possible until
the hardware has been serviced.
PicamDiscoveryAction_Found Hardware is now available for use.
PicamDiscoveryAction_Lost
Hardware is no longer available for use.