Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 155 / 357

Chapter 5 Configuration APIs 155
5.4.2.14 Picam_CanWaitForStatusParameter()
Description
Picam_CanWaitForStatusParameter()
determines if a parameter is a waitable
status.
Syntax
The syntax for
Picam_CanWaitForStatusParameter()
is:
PICAM_API Picam_CanWaitForStatusParameter(
PicamHandle camera_or_accessory,
PicamParameter parameter,
pibln* waitable);
Input Parameters
Input parameters for
Picam_CanWaitForStatusParameter()
are:
Output Parameters
Output parameters for
Picam_CanWaitForStatusParameter()
are:
Advanced API Usage
When used in conjunction with Advanced APIs, if
camera_or_accessory
is a camera
handle, it may be a handle to either the:
•
device
, or
•
model
.
camera_or_accessory:
Handle for the hardware under test.
parameter: Specifies the parameter to check as a waitable status.
waitable:
Pointer to the test results. Indicates if the specified parameter is a
waitable status.
Valid values are:
• TRUE
Indicates that the parameter is a waitable status.
• FALSE
Indicates that the parameter is not a waitable status.