Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 112 / 357

112 PICam™ 5.x Programmer’s Manual Issue 11
5.3 Parameter Constraints
This section provides programming information for the following PICam parameter
constraints:
• Camera-Specific Parameter Constraints
—
PicamRoisConstraint
— PicamPulseConstraint
— PicamModulationsConstraint
• Shared Camera/Accessory Parameter Constraints
—
PicamCollectionConstraint
— PicamRangeConstraint
5.3.1 Camera-Specific Parameter Constraints
This section provides detailed programming information about the following
camera-specific parameter constraint data structures:
• PicamRoisConstraint
• PicamPulseConstraint
• PicamModulationsConstraint
5.3.1.1 PicamRoisConstraint
Description
PicamRoisConstraint
defines the constraints placed on a set of Regions of Interest
(ROIs).
NOTE:
Regions of Interest may not overlap.
Structure Definition
The structure definition for
PicamRoisConstraint
is:
typedef struct PicamRoisConstraint
{
PicamConstraintScope scope;
PicamConstraintSeverity severity;
pibln empty_set;
PicamRoisConstraintRulesMask rules;
piint maximum_roi_count;
PicamRangeConstraint x_constraint;
PicamRangeConstraint width_constraint;
const piint* x_binning_limits_array;
piint x_binning_limits_count;
PicamRangeConstraint y_constraint;
PicamRangeConstraint height_constraint;
const piint* y_binning_limits_array;
piint y_binning_limits_count;
} PicamRoisConstraint;
continued on next page