Teledyne Princeton Instruments FER785-MM, User Manual, Page: 14 / 28

14 FER785-MM Diode Laser Source User Manual Issue 2
10. Pressing the power button on the front of the housing a SECOND time
switches the laser to GATE (or PULSE) mode.
NOTE:
Laser radiation is emitted only when the incoming signal at
the PULSE input on the rear of the laser housing is HIGH.
See
Figure 3-2 .
The amber LASER ON LED remains on, and the blue GATE LED begins to flash. See
Figure 3-4 .
Figure 3-4: Typical FER785-MM Diode Laser Source: GATE Mode
11. Pressing the power button a THIRD time turns the FER785-MM Diode Laser
Source OFF. All LEDs are extinguished.
4
4
11
-0
15
7_
000
9
B
LUE
F
LASHING
A
MBER
C
ONSTANT
ON