Teledyne Linea GigE 2K, User Manual

Page: 109 / 132

Linea GigE Series Camera Technical Specifications
•
107
Output Signals Electrical Specifications
External Outputs Block Diagrams
Balanced RS422 Drive Mode
Output Signal
OUTPUT (+)
PIN 5
Signal Ground
External Output
Signal
Single-Ended Logic Drive Mode
3.3V TTL
OUTPUT (-)
not connected
OUTPUT (-)
Output Enable
Output Signal
OUTPUT (+)
PIN 5
Signal Ground
Output Enable
External Output
Signal
Single-Ended Logic Drive Mode
5V TTL, 12V, 24V
OUTPUT (-)
not connected
Output Signal
OUTPUT (+)
PIN 5
Signal Ground
Output Enable
External Output
Signal
User Supplied Pull-up Resister
and Voltage Reference
External Output Details
•
Programmable output mode such as strobe, event notification, etc
(see outputLineSource feature)
•
User supplied Pull-up resistor value should be between 1K and 10K depending on supply
rail. Resistor Wattage should be calculated accordingly.