Teledyne Kibra DDR, User Manual, Page: 133 / 174

Kibra DDR Protocol Analyzer User Manual 131
Bank State View Teledyne LeCroy
3.5 Bank State View
The Bank State View provides a Bank by Bank view of the changing bus states. It is
separated by bank to enable a more insightful picture of the activity in a way that is often
obfuscated in a waveform view. While the waveform gives a chronological view of
commands across the bus, the Bank State View allows the user to view and understand
how the controller is accessing the ranks and banks to improve performance. The user
can collapse/expand multiple signals into individual banks in a rank, show/hide ranks and
banks, and zoom and scroll through the traffic on a specific bank.
Click on the Bank State View icon to display the Bank State View. The navigation in
the Bank State view is similar to the navigation in the Waveform view.
Figure 3.36: Bank State View
3.5.1 Supported States in the Bank View State
In the Bank State View you can view performance on read/write activity. The view
displays low power, pre ‐ charge, idle and active states.
Expand the Rank to view all the Banks that comprise it, as shown in Figure 3.36.You can
drag and drop banks within the rank to interchange the bank sequence.
The Bank State View currently supports the following states:
Idle
The bank is precharged and there is no R/W activity in the bank.
Active
One row in the bank is activated and R/W commands are issued on different columns.
Self-refresh
All the banks of a rank go into self ‐ refresh after receiving an SRE command on that rank.
Expand and
Collapse button