Teledyne Genie Monochrome Series M1280, User Manual

Page: 33 / 279

Nano Series GigE Vision Camera Genie Nano Specifications
•
31
Specifications: C2050
Supported Features Nano-C2050
Resolution 2064 x 1544
Sensor Sony IMX252 (3.2M)
Pixel Size 3.45 µm x 3.45 µm
Shutter type Full frame electronic global shutter function
Firmware option
(Field programmable)
High Sensitivity
Design (Bayer)
Standard Design
(Bayer)
RGB-Output
Standard Design
Full Well charge; dependent on
Firmware Design Loaded
2750e- (max) 11ke (max)
Sensitivity to Saturation 4x 1x
Max. Internal Frame Rate
Full resolution
143 fps 116 fps
Maximum Sustained Frame Rate
Output ( with TurboDrive v1 ) *
82 fps (8-bit) 82 fps (8-bit) N/A
Maximum Sustained Frame Rate
Output ( without TurboDrive )
38 fps (8-bit) 38 fps (8-bit)
9.7 fps (RGBA)
14.5 fps (RGB)
19 fps (Yuv422)
38 fps (mono8)
Pixel Data Formats Bayer 8-Bit Bayer 8-Bit
RGBA 32-bit
RGB 24-bit
Yuv422 16-bit
Mono 8-bit
Trigger to Exposure Minimum delay
(Synchronous Exposure Alignment)
2 line time
(8.8 µs)
2 line time
(10.8 µs)
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
0 µs
Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Max 1 line
(0 to 4.4µs)
Max 1 line
(0 to 5.4µs)
Trigger to Exposure Start jitter
(Reset Exposure Alignment)
0 µs
Actual Exposure Time Minimum
(see “exposureTimeActual”
in Sensor Control )
18.1µs (1 line time+13.73 us)
(increment of 4.4µs steps)
19.1µs (1 line time + 13.73 us)
(increment of 5.4µs steps)
Min. Time from End of Exposure to
Start of Next Exposure
10 lines–13.73µs
(30.3 µs)
10 lines–13.73µs
(40.4 µs)
Horizontal Line Time: 4.4µs 5.4µs
Readout Time
(H Line Time) x (lines in frame +23) — in μs
Auto-Brightness Yes , with Auto-Exposure and AGC (FPGA Gain or Sensor Gain)
Black offset control Yes (in DN)
Gain Control In-sensor Gain (1.0x to 251x)
In-FPGA Digital Gain (1x to 4x) in 0.007x steps
Binning Support No
Decimation Support No
Defective Pixel Replacement No
Image Correction No