Teledyne DALSA Piranha PC-30-02K60-00-R, User Manual, Page: 64 / 96

Piranha Color Camera 64
Color Correction Coefficients: White 0 1365 1365 1365
Red 0 4096 0 0
Green 0 0 4096 0
Blue 0 0 0 4096
Input LUT: Off
FPN Coefficients: Off
PRNU Coefficients: Off
Analog Gain [dB]: Red 10.0 10.0 10.0 10.0
Green 10.0 10.0 10.0 10.0
Blue 10.0 10.0
Analog Reference Gain [dB]: Red 0.0 0.0 0.0 0.0
Green 0.0 0.0 0.0 0.0
Blue 0.0 0.0
Total Analog Gain [dB]: Red 10.0 10.0 10.0 10.0
Green 10.0 10.0 10.0 10.0
Blue 10.0 10.0
Analog Offset: Red 80 80 80 80
Green 80 80 80 80
Blue 80 80
Digital Offset: Red 0 0 0 0
Green 0 0 0 0
Blue 0 0
Background Subtract: Red 0 0 0 0
Green 0 0 0 0
Blue 0 0
System Gain: Red 4096 4096 4096 4096
Green 4096 4096 4096 4096
Blue 4096 4096
Background Add: Red 0 0 0 0
Green 0 0 0 0
Blue 0 0
OK>
Returning Camera Settings with Get Commands
You can also return individual camera settings by inserting a ―
get”
in front of the
command that you want to query. If the command has a tap or pixel number parameter,
you must also insert the tap number or pixel number that you want to query. This
command returns the values without the descriptions found on the gcp screen. Refer to
Table 6 below for a list of available commands. To view a help screen listing the
following get commands, use the command
gh
.
Table 6: Get Commands
Syntax Parameters Description
get ccf x1 x2 Returns the FPN pixel coefficients for the pixel range
indicated.
x1 = Pixel start number
x2
= Pixel end number
get ccp x1 x2 Returns the PRNU pixel coefficients for the pixel range
indicated.
x1 = Pixel start number
x2
= Pixel end number
get clm