Version 02
teledynedalsa.com/ipd
19
Specifications
This following table lists the specifications of the BOA vision system:
General Specifications
Specification
Definition
Memory
Storage
256 MB Storage; 256MB Program
Image
Sensor
1/3 inch CCD; 7.4
μm pixel size
Resolution
640x480, 1024x768, 1280x1024
Type
Monochrome Progressive Scan
Exposure
22 us to 1000 ms (range depends on the camera resolution)
Acquisition
Async Reset, full-frame integration, maximum 60f/s with 640x480
Lens
C Mount
I/O
Trigger
1 opto-isolated hardware trigger input
Software trigger via Ethernet or internal timer
Inputs
1 General purpose opto-isolated.
Expandable via PL-200 I/O module
Outputs
2 General purpose opto-isolated
Expandable via PL-200 I/O module
Strobe
1 dedicated strobe output for LED light source
Status
N 2 application assigned LEDs
Network
Ethernet
10/100 BaseT
Serial
RS232
1 Port
– flying leads on lamp connector
Power
12-30V
Via Ethernet or IO connectors (not PoE compliant)
Device
150 mA maximum @ 24V (3.6 Watts)
Lamp
1A maximum (BOA powering light source directly)
Mechanical
Material
Machined Aluminum with anodize/paint finish
Mounting
8 x M4 plus optional mounting block
Size
44mm x 44mm x 56mm (without lens cover)
Environment
Temp
-10 C (14 F) to 50 C (122 F) Operating (-60 C to 80 C) Storage
Protection
IP67 with cables attached
Shock
70 G
Certification
FCC Class A and EU CE
