Teledyne 965 Five-Station, Installation And Operation Manual

Page: 12 / 22

965 Five-Station Battery Charger
1-4
1.3 Front and Rear Panel
Controls and
Connections
Refer to the figures below and to Table 1-3 for the front and rear
controls and connections on the Model 965 Five-Station Battery
Charger.
Figure 1-1 Battery Charger Rear Panel
Figure 1-2 Battery Charger Front Panel
1
2
3
D
WG 60-3004-166
Fan louvers - allow 4 inches (10 cm) clearance for ventilation
4
5
D
W
G 60-3004-166
Table 1-1 Front and Rear Panel Controls/Connections
Item Function
1
Mains Input Power Connector
This is the disconnect device. Position the Model 965 so that either this connector or the mains
plug outlet is accessible in an emergency.
2
Mains Selector Switch
Before connecting the mains input power connector, make sure this is in the proper position for the
AC mains voltage you intend to connect to.
3
Circuit Breaker
This disconnects the power in the event of an internal component failure.