manualshive.com logo in svg

Teledyne 440, System Manual, Page: 91 / 256

Share
Download
Teledyne 440 System Manual Download Page 91

5 – Operating Software

DPN 402196 Issue 4.1

© Teledyne TSS

5- 25 

5.3.3.5 Video Overlay Setup

To edit these settings, select Configuration

➥

Video Overlay Setup.

The video overlay operates in the similar way as the previous overlay by receiving a video signal 
arriving from a user supplied subsea camera and overlaying it with the DeepView for Windows 
information specified by the user via the Video Overlay Configuration. The Video Overlay Setup menu 
is available via the Configuration options and provides the options illustrated below in Figure 5-12. 

The video overlay has two possible modes. The first mode is where a copy of the SDC screen (the 
Runview) is overlaid on the video output. This is selected with the “Duplicate Runview” checkbox. The 
other mode is where selected information, for example the VRT and target position, are overlaid. The 
positions and colours of each of these elements can be fully controlled by the user.

Figure 5-12: Video Overlay Setup

Summary of Contents for 440

































































































































































































































































Reviews:

No comments