Teledyne 440 System Manual Download Page 86

Page: 86 / 256

5 – Operating Software

5-20

DPN 402196 Issue 4.1

The status line shows the communication port settings for the active serial device.

5.3.2.7 Video Overlay Enable

Enabling Video Overlay is covered in

section 5.3.3.5 "Video Overlay Setup" on page 5-25

along with

details of the configuration options available.

5.3.3 Configuration Menu

5.3.3.1 System parameters

See

section 5.2.3 "System Parameters" on page 5-6

5.3.3.2 Altimeter

The Altimeter option allows you to change the altimeter configuration for specific installations and to

view data transmitted by an altimeter connected directly to the SEP. To edit these settings, select
Configuration

➥

Altimeter.

To view data transmitted by an altimeter connected to an SDC serial communication port, use the
Terminal Window described in sub-section

section 5.3.2.6 "Terminal Window" on page 5-19

Figure 5-9: Altimeter Configuration

Summary of Contents for 440

































































































































































































































































Search results

Summary of Contents for 440

Reviews:

Teledyne 440, System Manual, Page: 86 / 256

Search results

Summary of Contents for 440

Reviews: