Teledyne 4060 Series, Instruction, Operating And Maintenance Manual

Page: 10 / 79

Series 4060
x
Teledyne Analytical Instruments
3.3 User Connections 28
3.3.1 Electrical Power Connections 28
3.3.2 Electronic Connections 28
3.3.2.1 Primary Input Power 29
3.3.2.2 Fuse Installation 30
3.3.2.3 50-Pin Equipment Interface Connector 30
3.3.2.4 Analog Output 30
3.3.2.5 Alarm Relays 32
3.3.2.6 Digital Remote Cal Inputs 34
3.3.2.7 Range ID Relays 35
3.3.2.8 Network I/O 35
3.3.2.9 Pin Out Table 35
3.3.2.10 RS-232 Port 36
3.3.3 Gas Connections 37
3.3.3.1 Effluent 40
3.3.3.2 Sample Bypass Vent 40
3.3.3.3 Fuel and Air Connections 40
3.3.3.4 Sample and Span Gas Connections 40
3.4 Placing the System in Operation 40
Operation ..................................................................................... 41
4.1 Equipment 41
4.2 Preliminary Power-Off Check List 42
4.3 Activating the Support Gases 42
4.3.1 Air 43
4.3.2 Carrier Gas 43
4.3.3 Span Gas 43
4.3.4 Fuel 43
4.4 Flame Ignition 43
4.4.1 Verification of the Flame Guard Circuit 44
4.4.2 Ignition and/or Flame Guard Circuit Failure 44