
Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.
UG2243800-4XX
May 28, 2019
P a g e
|
27
➢
REMOVABLE SIM MODULE: Displays whether the SIM
module is installed or not.
➢
SIM Status: Displays the SIM number and the SIM phone
number of each installed SIM card as well as radio
configuration. Refer to Section 4
–
Check SIM Card
Configuration, for this procedure.
➢
RADIO STATUS: If power is applied to the radio(s), this
menu will display the signal level of each the radio (0
through 32), the firmware version, and radio connection
stage. Refer to Section 4
–
Monitor Radio Signal Level
and Connection Phase, for this procedure.
➢
TRANSMISSION STATUS: This menu displays the files
that are currently being transmitted as well as the
percent completion.
❖
ETHERNET STATUS
: Displays the status, Up or Down, of the
Ethernet network interface on the front and back of the LRU
as well as all configured interfaces on the internal Ethernet
switch.
❖
CAPACITY
: Displays the amount of free space left within
selected recording files in the LRU. The amount of free
space is expressed in bytes, % of the theoretical maximum
capacity, and in flight hours. The Flight Hours value is
calculated using the speed of the data stream (WPS) to
which the WQAR is configured. This menu is also used to
recycle the WQAR (erase flight data).
❖
FILE INFO
: This option allows the operator to view the
actual sizes of the flight data files as they exist on the
internal SD card. This menu is also used to display archive
files (WGL Files) awaiting transmission.