Teledyne 2103, Installation And Operation Manual

Page: 25 / 94

2103 Modem Module
Section 2 Preparation and Installation
2-11
b. Below the heading TAP dialup or TAP Paging Terminal
Phone Numbers , click the letter corresponding with the
first letter of the name of your service provider. You will
advance to a screen that shows your service provider,
the access number, and parameter values (Figure 2-8).
Figure 2-8 TAP Service Parameters
4. For each phone number entered, enter a Pager ID, which is
the phone number of the cell phone or pager that will
receive the text message. (The ID will come from your
pager service.)
5. You have the option of entering a password of up to six
characters in length.
6. In the Comm field, select 7E1 or 8N1 for the communica-
tions control specification (your pager service has this
information).
7.
You must enter a message to be sent to the pager. In the field
labeled Message,
type the outgoing text message (maximum
of 32 characters).
8. Under “Alarm condition,” select the retry number and
interval, and define the alarm condition using the Equa-
tion Builder. Defined alarm conditions will appear on the
dropdown list.
9. Click the Apply button or press F9 when you are done, to
update the module’s settings.
TAP service
number and
parameter
values