Instruction Sheet 69-2003-725 January 2019
Teledyne Isco
P.O. Box 82531, Lincoln, Nebraska, 68501 USA
Toll-free: (800) 775-2965 • Phone: (402) 464-0231 • Fax: (402) 465-3001
E-mail: [email protected]
Teledyne Isco is continually improving its products and reserves the right to change product
specifications, replacement parts, schematics, and instructions without notice.
“
EAR-Controlled Technology
Subject to Restrictions Contained on the Cover Page”
Figure 6: APN location map
Note
If you are using a dynamic IP, please use the following
APN:
VZWINTERNET
Once you determine the APN you will be using, you
will need to connect to the modules with Flowlink and
navigate to the M
ODEM
tab.
1. In the M
ODEM
tab, you need to type the APN in
the field highlighted.
Figure 7: Modem screen
2. Apply the change in Flowlink and disconnect.
3. Then cycle power
ON
to the modules to allow the
modem to provision on the correct APN. The
modem will now be ready to operate correctly
on the Verizon network.
Note
Actual connection with the Verizon network may take
up to 45 minutes after cycling power.
If you have questions about APN set up on the Ver-
izon network, please contact the Product Support Group
at 1- 866-298-6174.
