September
2017
Sentinel V SC and RT Operation Manual
Page 230
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Timing Commands
The following commands set the timing of various profiling functions.
Available Timing Commands
This section lists the available Timing commands.
>T?
Available Commands:
TE 00:00:00.00 ---------- Time Between Ensembles
TP 00:05.00 ------------- Time Between Pings
TS 16/10/13,11:19:30.02 - Set System Date and Time (yy/mm/dd,hh:mm:ss)
T? ---------------------- Display T-Command Menu
>#T?
*** CAUTION: These commands are reserved for RDI use
and may not be currently supported!
Available Commands:
#TM 10 ------------------ Set minimum time between pings (ms) [0..100]
#T? --------------------- Display #T-Command Menu
>
Standard Timing Commands
TE – Time Per Ensemble
Purpose
Sets the minimum interval between data collection cycles (data ensembles).
Format
TEhh:mm:ss.ff
Range
hh
= 00 to 23 hours
mm
= 00 to 59 minutes
ss
= 00 to 59 seconds
ff
= 00 to 99 hundredths of seconds
Default
TE00:00:00.00
Recommended Setting. The default setting for this command is recommended for most applications.
Description During the ensemble interval set by TE, the Sentinel V Real-Time collects one automatic
ensemble. If TE = 00:00:00.00, the Sentinel V Real-Time starts collecting the next ensem-
ble immediately after processing the previous ensemble.
Example
TE01:15:30.00 tells the Sentinel V Real-Time to collect data ensembles every 1 hour, 15
minutes, 30 seconds.
The time tag for each ensemble is the time of the first ping of that ensemble.
