TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Operating Manual

Page: 31 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
NOSP17662
Revision 03
25
Connecting the ground terminal should be performed thanks to 3-wire shielded cables.
The connection of power supply wires (4 on side A and 4 on side B).
•
Two red wires on V +: +24 V
•
Two white wires on V-: 0 V
Connexion of the media wires (2 on side A and 2 on side B)
•
A red wire on one of the N
•
A white wire on the other N (no specific edge)
Figure 4 : Connecting drawing of the network versions
On board relays are not available on the digital version of the flame detectors.
For more detail, thanks to refer to the operating manual NOSP 15251
4.4 Detection cartridge
The cartridge is separated from the detector to enable its
replacement. Its dismantling is extremely easy and does not
need to touch the rest of the unit.