Copyright
© 2012 Teledyne LeCroy, Inc. All rights reserved.
Part Number: 922852-00 Rev. A 3/13
This document may be printed and reproduced without additional permission, but
all copies should contain this copyright notice.
Trademarks and Servicemarks
Teledyne LeCroy, USB Advisor T3, USB Protocol Suite, CATC Trace, and
BusEngine are trademarks of Teledyne LeCroy Inc.
Microsoft and Windows are registered trademarks of Microsoft Inc.
All other trademarks are property of their respective companies.
Disclaimer
Users are fully responsible for their application of any products. The Software
License and Limited Warranty for the accompanying product are set forth in
information that shipped with the product and are incorporated herein by this
reference. If you are unable to locate the Software License or Limited Warranty,
contact Teledyne LeCroy for a copy.
Changes
Product specifications are subject to change without notice.
Teledyne LeCroy reserves the right to revise the information in this document
without notice or penalty.
Teledyne LeCroy Customer Support
Mail:
3385 Scott Blvd., Santa Clara, CA 95054-3115
Web: teledynelecroy.com/tm/Library/software/PSG
E-mail: [email protected]
Tel:
(800) 909-7112 (USA and Canada)
Tel:
(408) 653-1260 (worldwide)
Fax:
(408) 727-6622 (worldwide)
6.
Click
on the Tool Bar. The system starts to record the USB traffic
immediately. After 16 MB of traffic are recorded, the Analyzer uploads the
data and displays the packets in the trace window.
7.
To terminate recording before the snapshot automatically completes,
click
on the Tool Bar.
When the recording session is finished, the traffic is automatically uploaded
from the Analyzer to the hard drive on your host machine as a file named
data.usb
or the name you assigned as the default filename. While the file is
being uploaded, you should see a brown progress bar at the bottom of the
screen. When the bar disappears, it indicates that the data has been
uploaded to disk.
8.
To save a current recording for future reference, select
Save As
under
File
on the Menu Bar, OR click
on the Tool Bar to display the standard
Save As
screen.
Give the recording a unique name and save it to the appropriate directory.
For additional information on the results display, see the
USB Protocol Suite User Manual
.