Teledyne Lecroy PP011-1 Operator'S Manual Download Page 2

 

 
 
© 2017 Teledyne LeCroy, Inc. All rights reserved. 
Unauthorized duplication of Teledyne LeCroy documentation materials is 

strictly prohibited. Customers are permitted to duplicate and distribute 
Teledyne LeCroy documentation for internal educational purposes. 
Teledyne LeCroy is a registered trademark of Teledyne LeCroy, Inc. Windows 

is a registered trademark of Microsoft Corporation. Other product or brand 
names are trademarks or requested trademarks of their respective holders. 
Information in this publication supersedes all earlier versions. Specifications 
are subject to change without notice. 

Warranty 

Teledyne LeCroy warrants this oscilloscope accessory for normal use and 
operation within specification for a period of one year from the date of shipment. 
Spare parts, replacement parts and repairs are warranted for 90 days. 
In exercising its warranty, Teledyne LeCroy, at its option, will either repair or 
replace any assembly returned within its warranty period to the Customer 
Service Department or an authorized service center. However, this will be done 

only if the product is determined by Teledyne LeCroy’s examination to be 
defective due to workmanship or materials, and the defect is not caused by 
misuse, neglect, accident, abnormal conditions of operation, or damage resulting 
from attempted repair or modifications by a non-authorized service facility. 
The customer will be responsible for the transportation and insurance charges 
for the return of products to the service facility. Teledyne LeCroy will return all 
products under warranty with transportation charges prepaid. 
This warranty replaces all other warranties, expressed or implied, including but 
not limited to any implied warranty of merchantability, fitness or adequacy for 
any particular purposes or use. Teledyne LeCroy shall not be liable for any 
special, incidental, or consequential damages, whether in contract or otherwise. 
 
928599-00 Rev A 
July, 2017 
 

Summary of Contents for PP011-1


















Reviews: