Teledyne Lecroy PCI Express Gen4 x4 U.2, User Manual And Quick Start Manual, Page: 6 / 8

Step 7. Bend Drive Carrier Metal End Out Flat
Gently (by hand) bend the metal end of the drive carrier out flat.
Step 8. Re-Attach the Plastic Side Rails
After the Side Rail corners have been removed, the side rails can be reattached using the original screws.
Step 9. Attach the PCI Express PCI Express Gen4 x4 U.2/U.3 Single/Dual Port Interposer to the Drive
Carrier
Slide the Interposer into the drive carrier, using the original mounting screws to hold it in place. The Interposer should be aligned with
the same holes the drive carrier would have used. Note: Screw type for use with Drive Carrier: Metric screw, size M3, maximum
length: 8mm.