PCI Express
®
Gen4 OCP NIC 3.0
Interposer
User Manual and
Quick Start Guide
Components
The interposer package includes the following components:
•
PCI Express Gen4 OCP NIC 3.0 Interposer
•
DC Power Adapter (+12V @ 5A)
•
External latch bracket
•
External lever
•
User Manual and
Quick Start Guide
(this document)
Introduction
Use this document for quick installation and setup.
Teledyne LeCroy’s PCI Express Gen4 OCP NIC 3.0 Interposer provides a quick and simple means for protocol analysis of
Gen4 OCP NIC 3.0 small form factor devices based on PCI Express (PCIe
®
) protocols. The Gen4 OCP NIC 3.0 Interposer
Card, used with the Summit T4 family of Protocol Analyzers, enables PCIe bus traffic between a host backplane and Gen4
OCP NIC 3.0 form factor device to be monitored, captured, and recorded for protocol analysis. The interposer supports data
rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s and 16.0 GT/s, side band signals such as PERST#, WAKE# and SMBus (SMBCLK,
SMBDAT). The Gen4 OCP NIC 3.0 Interposer supports link widths up to x16.
PCI Express Gen4 OCP NIC 3.0 Interposer
1
2
Inspect the received shipping container for any damage. Unpack the container and account for each of the system
components listed on the accompanying packing list. Visually inspect each component for absence of damage.
In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.
