OE695G Optical-to-Electrical Converter
14
Certifications
Teledyne LeCroy certifies compliance to the following standards as of the
date of publication. For the current certifications, see the EC Declaration of
Conformity shipped with your product.
EMC Compliance
EC Declaration of Conformity - EMC
The converter meets the intent of EC Directive 2014/30/EU for
Electromagnetic Compatibility. Compliance was demonstrated to the
following specifications as listed in the Official Journal of the European
Communities:
IEC/EN 61326-1:2013 EMC requirements for electrical equipment for
measurement, control, and laboratory use
1
E
LECTROMAGNETIC
E
MISSIONS
:
IEC/EN 55011/A1:2010 Radiated and Conducted Emissions Group 1 Class A
2 3
E
LECTROMAGNETIC
I
MMUNITY
:
IEC/EN 61000-4-2:2009 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV
vertical/horizontal coupling planes
4
IEC/EN 61000-4-3/A2:2010 RF Radiated Electromagnetic Field, 3 V/m, 80-
1000 MHz; 3 V/m, 1400 MHz - 2 GHz; 1 V/m, 2 GHz - 2.7 GHz
1 To ensure compliance with the applicable EMC standards, use high quality shielded interface
cables.
2 This product is intended for use in nonresidential areas only. Use in residential areas may cause
electromagnetic interference.
3
Emissions which exceed the levels required by this standard may occur when the probe is
connected to a test object.
4 Meets Performance Criteria “B” limits of the respective standard: during the disturbance, product
undergoes a temporary degradation or loss of function or performance which is self-recoverable.
E
UROPEAN
C
ONTACT
:*
Teledyne LeCroy Europe GmbH
Im Breitspiel 11c
D-69126 Heidelberg
Germany
Tel: (49) 6221 82700
