Operator’s Manual
EAR99 technology subject to restrictions on copyrights page.
35
Certifications
Teledyne LeCroy certifies compliance to the following standards as of the date of publication.
For the current certifications, see the EC Declaration of Conformity shipped with your product.
EMC Compliance
EC
D
ECLARATION OF
C
ONFORMITY
-
EMC
The HVFO probe meets the intent of EC Directive 2014/30/EU for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications as listed in the Official Journal of
the European Communities:
IEC/EN 61326-1:2013 EMC requirements for electrical equipment for measurement, control, and
laboratory use
1
Electromagnetic Emissions:
IEC/EN 55011/A1:2010 Radiated and Conducted Emissions Group 1 Class A
2 3
Electromagnetic Immunity:
IEC/EN 61000-4-2:2009 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV vertical/horizontal
coupling planes
4
IEC/EN 61000-4-3/A2:2010 RF Radiated Electromagnetic Field, 3 V/m, 80-1000 MHz; 3 V/m,
1400 MHz - 2 GHz; 1 V/m, 2 GHz - 2.7 GHz
1 To ensure compliance with the applicable EMC standards, use high quality shielded interface cables.
2 This product is intended for use in nonresidential areas only. Use in residential areas may cause electromagnetic
interference.
3
Emissions which exceed the levels required by this standard may occur when the probe is connected to a test object.
4 Meets Performance Criteria “B” limits of the respective standard: during the disturbance, product undergoes a
temporary degradation or loss of function or performance which is self-recoverable.
E
UROPEAN
C
ONTACT
:*
Teledyne LeCroy Europe GmbH
Im Breitspiel 11c
D-69126 Heidelberg
Germany
Tel: (49) 6221 82700