Frontline Technical Support: Phone +1-434-984-4500 or email [email protected]
Quick Start
Guide
Computer System Requirements
Supported Systems
l
Operating System: Windows 7/8/10
l
USB:USB 2.0 and later
Minimum Requirements
l
Processor: Core i5 at 2.7 GHz
l
RAM: 4 GB
l
Free Hard Disk Space on C: drive: 20 GB
Install Software
l
From Download: Download the latest ComProbe installer
from FTE.com. Once downloaded, double-click the
installer and follow the directions.
http://www.fte.com/sd-soft
1. Hardware Setup - Part 1
Once you have installed the software and the device drivers, the next step is to set up the hardware.
Provided with the Frontline SD hardware is one of two Secure Digital (SD) Input/Output (IO) adapters: 1) the standard SD card adapter,
and 2) the micro SD card adapter. Provided with each is a cable that must be connected to the adapter prior to the connecting the
adapter to the Frontline SD hardware. The following tables lists the Frontline SD Hardware pinout, with corresponding cable color-code
and the adapter pinout. In addition the table shows the pin designation for the SD 4-bit and 1-bit high-speed mode and the SPI mode.
Pin
SD 4-bit Mode
SD 1-bit Mode
SPI Mode
1
CD/DAT3
Data Line 3
-
-
CS
Card Select
2
CMD
Command Line
CMD
Command Line
DI
Data Input
3
VSS1
Ground
VSS1
Ground
VSS1
Ground
4
VDD
Supply Voltage
VDD
Supply Voltage
VDD
Supply Voltage
5
CLK
Clock
CLK
Clock
SCLK Clock
6
VSS2
Ground
VSS2
Ground
VSS2
Gound
7
DAT0
Data Line 0
DATA
Data Line
DO
Data Output
8
DAT1
Data Line 1/Interrupt
IRQ
Interrupt
IRQ
Interrupt
9
DAT2
Data Line 2/ Read Wait
RW
Read Wait
-
-
Table 1 - SDIO Pinout