Teledyne Lecroy Frontline BPA 600, Hardware And Software User Manual, Page: 160 / 348

l
Bluetooth low energy packets from non-configured devices are excluded if the
Configured
radio button in the LE Devices group is selected.
l
Frame Display filtering has no effect here in that packets that are filtered-out
in Frame Display are still used here as long as they otherwise meet the
criteria for each radio button as described below.
4.3.4.6
All
radio button
All
packets are used for average throughput, and
packets occurring in the last 1 second of the session
are used for 1 second throughput, except that
Bluetooth low energy packets from non-configured devices can be excluded as noted above.
4.3.4.7 Selected radio button
Selected packets (the selected packet range is
shown in the timeline header) are used for average
throughput, and packets in the 1 second duration
ending at the end of the last selected packet are used for 1 second, except that Bluetooth low
energy packets from non-configured devices can be excluded as noted above.
Figure 4.60 - Timeline Header Showing Selected Packets
4.3.4.8 Viewport radio button
The viewport is the purple rectangle in the
Throughput Graph
and indicates a specific starting
time, ending time, and resulting duration. Packets
that occur within that range of time are used for average throughput, and packets in the 1 second
duration ending at the end of the last packet in the viewport time range are used for 1 second
throughput, except that
Bluetooth low energy packets from non-configured devices can be
excluded as noted above.
Figure 4.61 -
Throughput Graph
viewport.
Chapter 4 Capturing and Analyzing Data TELEDYNE LECROY
Frontline BPA 600 Hardware & Software User Manual 152