Teledyne Lecroy Frontline BPA 600, Hardware And Software User Manual, Page: 169 / 348

Figure 4.77 - 802.11 Source Address Drop Down Selector
4.3.4.22 Coexistence View - Throughput Radio Buttons
The radio buttons in the Throughput group specify whether to show packet and/or payload
lines in the
Throughput Graph , and also whether to show packet or payload throughput in
the throughput indicators (if the Both radio button is selected, packet throughput is shown
in the throughput indicators).
4.3.4.23 Coexistence View - Timeline Radio Buttons
The radio buttons in the Timeline group specify timeline visibility. The first three buttons
specify whether to show one or both timelines, while the Auto button shows only timelines
which have had packets at some point during this session. If no packets have been received
at all and the
Auto button is selected the 2.4 GHz timeline is shown.
4.3.4.24 Coexistence View – low energy Devices Radio Buttons
The radio buttons in the LE Devices group (where “LE” means Bluetooth® low energy)
specify both visibility and inclusion in throughput calculations of Bluetooth low energy
packets. The All radio button shows and uses all Bluetooth low energy packets. The
Configured radio button shows and uses only Bluetooth low energy packets which come
from a configured device.
4.3.4.25 Coexistence View – Legend
(This video provides more details on the Legend...)
TELEDYNE LECROY Chapter 4 Capturing and Analyzing Data
161 Frontline BPA 600 Hardware & Software User Manual