Operation
Model 3110
Teledyne Analytical Instruments
22
changes
RESET&START
to
STOP
. During logging a
blinking “L” appears in the upper left corner of the screen.
To stop the data logger:
1.
Press ENTER to stop the data logger and return to the
LOG
RESET & START
screen.
3.2.11 LOG TRANSMIT Screen
Data can be downloaded to a computer using the 9-pin D-
subminiature port and cable attached to a PC. The D-sub port accepts a
standard data cable with a DB-9 connector. The computer must be able
to accept data from a source with the following characteristics:
9600 baud
8 bit data
no parity
1 stop bit
no flow control
Refer to your computer manual for details on how to setup the RS-
232 communications port on your computer.
To download a data log:
1.
Use the UP/DOWN keys to navigate to the
LOG TRANSMIT
screen. Then press ENTER to enter the setup screen.